The carpets in our homes are not just floor coverings. They provide warmth and comfort. They can become dirty quickly due to daily foot traffic and accidents, as well as pet activities. Knowing How to clean a rug Not only will it look pristine, but you can also prolong its life and create a healthier environment.
This guide will walk you through all the steps necessary for regular and deep cleaning of your carpet, so that it remains fresh and vibrant.
You’ll also Need the Following Tools and Materials
Equipment and Tools
- Vacuum cleaner with high suction (preferably dry and wet vacuum cleaner)
- Soft-bristle brush
- Use a white sponge or cloth to clean the surface
- Spray Bottle
Materials
- Mild carpet cleaner or shampoo
- Distilled White Vinegar
- Baking soda
- Salt
- Warm water
How to Clean carpets: Deep cleaning & Regular cleaning instructions
As with any household item, carpets require different levels of care. Regular cleaning maintains the carpet’s look and removes dirt on the surface, while deep cleaning targets stubborn stains and deeply embedded dirt.
Consider regular cleaning to be your weekly skincare regime and deep cleaning like a monthly spa treatment. Both are necessary for the health and longevity of a carpet. We’ll look at how to do both types of carpet cleaning in hamilton nz effectively.
How to Do a Regular Carpet Cleaning
It is important to regularly clean your carpet in order to keep it looking good and free of surface dirt and minor stains. How to maintain your carpet’s appearance between deep cleans
Dust and dirt removal.
- Vacuum your carpet regularly: Vacuum at least once a weekly to remove dirt, dust and pet hair. Consider vacuuming more often if you have children or pets. Use a vacuum cleaner that can effectively remove dirt.
- Change direction: When vacuuming, you should change directions occasionally to ensure that the carpet fibers are lifted and cleaned thoroughly.
- Pay attention to areas with high foot traffic: Hallways or living rooms may need more attention because of the increased foot traffic.
Spot-cleaning stains.
- Be quick: The quicker you deal with a spill, it will be better. To absorb as much spillage as possible, blot the stain (don’t scrub) with a white clean cloth.
- Use mild cleaning agents: Warm water mixed with a few drops dish soap will do wonders for most stains. The solution should be blotted with a clean, dry cloth after being sprayed onto the stain.
- Rinse, then dry: After washing the area, dab it with a dampened cloth to remove any soap residue. After cleaning, dry the area with a clean cloth.
Regular maintenance will prevent dirt accumulation and reduce the frequency of deep cleaning.
How to Deep-clean Carpets at Home.
It’s like having a spa day on your carpet. It goes deep to remove dirt that is hidden and restores the coziness. How to get started?
Cleaning carpets with distilled vinegar.
White vinegar can do wonders for your carpet. Natural cleaning properties of white vinegar can remove most stains from carpets and restore their appearance.
Start by doing a quick spot-check and vacuum.
- Begin by thoroughly vacuuming the carpet to remove any surface dirt.
- Pre-treat any visible stains with a mixture of water and vinegar. Let it sit for several minutes.
Mix vinegar with water.
Mix equal parts of distilled white vinegar with warm water in a bucket.
Be careful not to use too much vinegar, as this can cause a strong smell. Do a test patch in a non-obvious area before you apply any solution.
Wait, then apply the solution.
- Use a damp cloth or sponge to blot on the carpet. Do not oversaturate the carpet. You want it damp, but not wet.
- Let the solution sit for at least 5-10 minutes.
- Wipe away the solution with a dry, clean cloth.
Allow your carpet to breathe and dry.
Use fans or open windows to accelerate the drying process. Make sure the carpet is dry before you walk on it.
How to clean carpets with baking soda and salt.
This dynamic duo will effectively clean and deodorize carpets.
Clean stubborn marks and pre-clean before tackling them.
- Remove any dirt from the carpet by vacuuming.
- Make a paste of baking soda with a bit of water to remove stubborn stains. Let it sit on the stain for a couple of minutes.
Baking soda and salt can be mixed together.
Mix equal amounts of baking soda and sea salt in a large bowl.
Sprinkle, spray and gently scrub.
- Sprinkle the baking soda mixture and the salt evenly on the carpet.
- Spray the area lightly with water.
- Scrub the carpet gently with a brush made of soft bristles.
Let it dry and then vacuum.
- Remove any residue with a clean, dry cloth.
- Allow the carpet to completely dry.
- Remove any baking soda or salt residue from the carpet by vacuuming.
How Often Should Carpets be Cleaned?
Vacuuming regularly is essential, at least one time a week. This is especially true if you own pets or children. As soon as you notice an accidental spill, clean it up immediately.
What about a thorough cleaning? At least twice a yearly, aim to do a deep clean. It will keep your carpet feeling soft and looking new.
Keep your Carpet Cleaner longer by Avoiding common stains.
- Use mats for entrances: Place rugs at the entrances to collect dirt and moisture. You can clean the mat much easier than the carpet.
- Remove shoes: Make your home a shoe-free zone. This simple act will reduce dirt.
- Remove spills as soon as possible: If you clean up a spill immediately, it is less likely to become a permanent stain.
- Move your furniture regularly: It prevents wear patterns, and allows you to clean the hidden areas.
- Protect your carpets with a rug protector: This is a great idea for areas where there is a lot of foot traffic, or under heavy furniture.
- Vacuum frequently: This is a simple tip that makes a huge difference. For more information, read our blog about How to use a vacuum efficiently.
- Avoid direct sun: Too many rays of sunlight can cause your carpet to fade. Use blinds or drapes during peak sun hours.
+ There are no comments
Add yours